The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Ignition Switch issues 120-130

I have a lock cylinder (which has tumblers in it) in the same condition.
That is, the tab that sticks out the back seems to be loose on the cylinder so that
it does NOT turn as far as the key turns. I suspect this looseness is part of the reason
that so many 122, PV and other ignition switches go bad - not being turned FULLY to the
start position, resulting in arcing at the internal contacts, requiring that the switch
be turned further to reach a contact position. But since it won't quite turn that far,
you start breaking keys...
I sent my lock cylinder to one of our posters here on the brickboard and he said he
would not be able to fix it. One of these days I'll look it over and see if there IS
a way to fix it. I'll post here when I succeed.
--
George Downs Bartlesville, Oklahoma






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.