The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Bleeding after changing front calipers? What now? 240 1990

You said you are pressure bleeding...with a garden sprayer or a motion pro or something...pumping the brake pedal is only necessary to break past blockages or to speed things up.

The process to bleed with a minimum of fuss if well documented her when replacing components:

Block the brake pedal half the way down before removing components
Remove said components and replace
Attached pressure bleeder and pump up to about 12 pesi
Remove the block from the brake pedal
If you are not bleeding all four calipers...start with the lowest (physically) on one caliper and bleed all three bleeder until no bubbles
Make sure you still have fluid in the res if you are not using pressure bleeder that replenishes the res
Do the other wheel the same way

If the pedal is overly soft...rinse and repeat. NEVER allow the brake pedal to travel further than it normal stroke at any time during the process.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.