The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Checking injectors 200 1992

If it gets down to this, and you decide to see the volume from the injectors, don't start the engine (nor crank the starter) to have the injectors activated. When removing the rail's attachment to the manifold, make sure to re-connect the ECU ground wires at the rail bolts, jumper the fuses (4-6) to run the pumps, turn the key to KP-II (don't crank) and use the OBD's actuator test mode (read about this in the FAQs or google OBD 240 Volvo) as this is the same 240 or 740.

OP, this thread seems to have a mirror on TB in which the suggestion "As in, got gas in your tank?" might be an embarrassingly simple question, but one I should have asked last week before suggesting a $100 tow. Get a can of ether and see if it runs on that for a few seconds.
--
Art Benstein near Baltimore

Deja Moo: The feeling that you've heard this bull before.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.