The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

123 Distributor install help - B20F

posted by  someone claiming to be SprtWgn on  Mon Feb 22 12:20 CST 2016 [RELATED]

If I removed the old distributor with the motor at 10btdc and rotor pointing at #1 position, that = firing position for #1, correct? These distributors can't be installed 180 degrees out due to the offset drive, right? So, installing the new dist. should be as simple as dropping the new unit in and static timing the system. Not really any chance to get it upside down, right? So what else might be the reason I get no start with this brand new 123-Distributor?
Thanks again and I hope I'm not being too dense.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.