The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

240 no start problem 1989

The ignition control module (part # 3501921) is screwed to the inner fender under the hood, just behind the battery. It mounts to an aluminum heatsink. There should be thermal conductive paste between the module and the heatsink, and between the heatsink and the metal fender. Over time, the past dries up and loses effectiveness. When the module overheats, the car dies. When the module cools off, the car can be restarted.

The module itself is quite expensive new if bought from Volvo, but there are plenty of much more affordable aftermarket ones. I suggest you search for part 3501921 at FCPeuro.com to see what's out there. Note that some come with the heatsink and others dont.

That said, a $5 tube of thermal conductive paste and the 10 minutes it takes to remove the module, clean the mating surfaces, apply the paste, and reinstall MAY be all you need to do.

good luck,
john

--
1989 245 245K / 1993 945 131K






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.