The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

No start Code 1-2-3 200 1989

"Can a failed Coolant Temperature Sensor cause a no start?"

It could. A failed sensor might cause you to flood the combustion chamber if you were not paying attention to the resulting fuel odor, or had the good fortune to think to hold the pedal to the floor.

But there are other reasons for 123. And sometimes there are multiple codes stored, with 123 just being the first delivered. All those good parts you mention, I imagine you know they're "good" because you've swapped them all one by one from a working car. The one thing you didn't swap is the wiring harness, of course. Impractical.

Check the ground wires going to the fuel rail. Check them back to the big splices under the vinyl sheathing, if you've already performed the tests from the ECU suggested in your earlier thread.
--
Art Benstein near Baltimore

Mistakes are the portals of discovery. -James Joyce






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.