The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

P1800 ES


Ok so here is latest p1800 philes

So I don't have gas at the csv. When I ground single wire from thermo timer
I get spraying at the csv with 10.5 volts on the meter. The battery voltage
is fully charged and drops to 11.5 at the battery terminals when cranking.
I guess this value depends on cranks amps of battery.

With regards to pressure sensor test I get 95, 367 and Infiniti on
resistance tests. When I do suck test I got nothing as pipe appeared to
have a leak. I replaced with a new piece of half inch fuel rated tubing
upon performing again I can hear diaphagm operating with enough vacuum to
'grab' my lips.

So then I crank and crank and crank...! And not even attempting to fire
now...I was hoping I would get an attempt to start now
Any ideas folks?

Thanks in advance







USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.