The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: How to remove M46 transmission 700 86

posted by  someone claiming to be Winston on  Mon May 21 00:07 CST 2001 [RELATED]

Nathan,

I hope the following is of help.Remove the trim box around the gear shift lever. Disconnect the shift lever cover from the floor. Remove the snapring at the base of the shifter lever. All the above is from the inside of car. From underneath the car, disconnect the gearshift rod at the gearshift lever. Remove the lock screw, and press out the pivot pin. Push up on the shift lever. From inside car pull the lever up and out of the car.

I just want to add that the lock screw is a (Allen screw) and it is at the bottom of the shifter leaver you should see it from under the car, it may be covered with dirt. I don't know what size Allen it is. once it is removed knock out the pivot pin with a punch or a bolt.The pivot pin is what holes the shiftlever on the gear box. Good luck.

Winston





USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.