The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Front Struts/ PBBlaster 700 87

Sorry, last week I gave a method of removing strut cartridges through bottom of strut housing, when top nut is rusted in place(happens in salty Winter enviroments on a 14 year old car). One important point I forgot to point out is you start by grinding, or cutting, top 1/8 inch of locking nut (just above top of housing). When you can see top edges of strut cartridge, you can hammer the cartridge from bottom, up approximately 1 inch (the cartridge body has a larger diameter about 1 inch down from top, believe me I know, and my knuckles know, the hard way). This gives some clearance to move snap-ring. Then you can remove snap-ring from bottom of strut housing. And proceed to remove remainder of top nut. My humble apologies!

Also, I did not have a chance to check last week's reply. Where can I find PBBlaster in the Toronto, Ontario area.

1987 745Ti, 290,000 kms, Toronto, Ontario






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.