The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

U-joints 200 1987

I'm a mechanic and the first thing I would do is get under the car and do a visual inspection: loose bolts/fasteners, bushings that are visibly in need of replacement, or anything else that looks unusual.

As far as what would cause your problem....I would suspect a bad u-joint. The symptoms you described, especially "occurs when I pull away from a stop", are the classic signs of u-joint failure.

If the u-joints are ok, the next thing that I would check are the torque rod bushes or a loose mounting bolt for the torque rods. If a torque rod bolt was loose it could cause clunk when you pull away from a stop (axle would not be located securely so it would be able to move). However, if this was the case it would most likely also make a noise when you are shifting gears or when load changes on the axle....i.e. putting car into gear, decelerating quickly, etc.

Hope this helps. Regards,

Neal






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.