The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Engine Kaput!! Help 700 1987

Dead head.

That's what is likely the problem. That or the gasket.

Don't bother with an impact wrench for the exhaust bolts. Either do one of two things; Split them off with the appropriate tool (emergency) or just douse them NOW in PB Blaster, and let them soak. Then do it again tomorrow, and until you pull the head. Wire brush the remainder of the studs (the part that you can see). Then clean the threads a little bit and remove the bolts. It usually does the trick.

If not... oxyacetylene torch is a good one.

Oh... if you are having problems with the head, just pull the whole manifold off with it. Take it from the downpipe side, and disassemble it elsewhere, when it's off the block.

The head is easy to remove, except the head bolts. Big breaker bar on those.

--
Chris Herbst, near Chicago, IL. 93 940, 91 240, 90 240, 88 740, 87 240






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.