The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

This is embarrasing, but... 200

Actually, I think I know the main problem here, that being that I am a bonehead.
I first tried my jumper setup with the ignition off. When nothing happened I switched the jumper off, turned the ignition key on and must have forgot to turn the jumper back on before I lifted the plate. I guess. That's the only way it makes sense. But I believe the ignition needs to be on for that method and it was, mostly, not.
I also may have given the impression that the car is not running. It is. It's just doggy and idles a little rough. This was my reason for wanting to check the spray.
I will do this again tonight only I will use the fuse panel instead of the relay connector.
Also, thanks for pointing out the that the fact that I would have been flooding the cylinders with gas. Under the circumstances I'm glad I was doing the pump thing wrong. I will remove all four injectors on the next attempt.
I am going to run this test correctly!
Thanks to all who replied.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.