The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

DESPERATE FOR HELP!!! STARTING PROBLEMS 200 1989

Fuel pump relay, or even the fuel pump fuse.

Fuse is the 25 amp one on the LH side in the engine bay. Never have I seen a fuse actually blow. It's the holder that craps out. Take the whole thing apart, being careful as the input is hot all the time. If the holder is full of crud, look at the things on the ends of the wires themselves, they will allow the fuse to be put into them without using the holder at all. Try starting it. If OK, got to Radio Shack and get a 30amp water proof fuseholder for about $2 and hook it up.

The fuel pump relay is located above the passenger's right toe. Pull the knee pad and you should see it. Six pins, large connector, clipped onto the firewall. You can try resoldering it, or get a new one. Not cheap at a dealer.

If the relay base shows evidence of overheating, the relay is the likely source of your no-start problem.

Good Luck,

Bob

:>)






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.