The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Schrader Valves

A schrader valve is what keeps the air in your tires. Push the little pin in the center and the air can go in or out. Which way depends on relative pressure.

The fittings on the a/c compressor - R12 type - have similar Schrader valves on both high and low side. If a line is connected to a fitting incorrectly such that the Schrader valve isn't open, refrigerant flows slowly or not at all.

Remember that a can is not a pound. It's easy to mis-calculate how much is needed. The fender tag on the Left side should give the amount of R12 needed, RS134a usually is 85% of that. Mine wants 48 ounces R12, so I'll use 40 ounces of RS134a.

Good Luck,

Bob

:>)






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.