The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Strange predictable stalling getting worse nedd help! 1800 1972

If the missing is a matched pair (1/3 or 2/4)the problem is most likely the points for your fuel injection located at the base of the distributor. There is a three wire plug that goes into the base--this is the wiring back to the ECM. On each side of the plug is a screw. Remove these, then remove the points assembly. You'll probably find one side is dirty. Clean gently with alcohol on a business card. This should remove dirt and grit. These are low voltage points--not subject to the same wear as your ignition points.
Let us know what you find.
Rolfe 71E






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.