The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

EZ & LH 2.? switch in a b23f

And because of this you need to have a T-shaped hole cut into the top of the bell housing and a tapped hole for the bracket.
You'd need a complete wiring harness for the 89+ car, plus the ECU which is a tough one to get. Then, you'd want the switches and sensors from the newer car, the crank sensor itself, the flywheel or flex plate.
And then when you got the wiring back together, you'd have the wrong connections at the headlights and turn signals.
A better arrangement would be the "in-between" generation of injection in the 85-88 cars. That way you could get rid of the troublesome 83-84 AMM and use the more reliable 007. If you found an 85 car or wiring harness anyway, the connectors would match up. An 86-88 240 will present the same problems with the headlight wiring.
Still not as much engineering to do as with the conversion to crank-triggered FI.
--
Rob Bareiss, New London, CT 86 244, 87 244, 88 744






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.