The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

struck caliper 200 1985

Greetings all-
I am in the middle of bleeding the brakes, and I have ran into a problem. I am using ez-bleed. To insure that i have all the air out of the system, I pulled the pads and put in blocks of wood to push the pistons back. Bled the system. Now I just pulled the blocks of wood out, and one caliper, the left rear, is stuck pushed out. To my surprise, the block of wood fell out, and while I was bleeding the other, the pistons on that caliper were pushing into the rotor. I have taken the ez-bleed off, and have no pressure within the system, but I still can't push either of the 2 pistons back so I can get the pads in. They are REALLY stuck. Any ideas? BTW, the MC cap is off while I am trying to push the pistons back.


Thanks-

Joe HC
--
1977 244, 140k, IPD anti-sway bars; 1988 245, 206k






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.