The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

replacement of glass? 700 1989

It's not extremely difficult. First you have to remove the door glass. Then the metal track for the rear edge of the door gless. There is a screw on the lower edge of the track. On the top, under the rubber door seal, there is a rivet that needs to be drilled out. You will also have to remove the rubber door glass channel. Once the chanel, rivet and screw are out, remove the outer moulding on the door at the base of the door glsass. It lifts sraight off. Now you slide the upright chanel foreward to release the rubber seal for the fixed glass. slide the rubber mounting seal for the fixed glass out of the door. Clean the glass chips out of the seal and slip it over the new glass. Lube the seal with liquid soap or spray silicone, and slide it back into the door. Next, lube the channel you removed earlier and slide it back into position, reinstall screw and a new rivet on the top mounting. Reinstall the door glass and seal, and finish reassembly.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.