The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

87 245 dl feul pump relay repeated failure

Instead of a new relay, resolder the one you have already, using some silver bearing solder. This will be stronger. At the same time, clean the contacts on the relay and in the relay socket with contact cleaner. If you can tighten up the contacts in the relay socket, that may help, too. Try using a small pick.

Camshaft seal, front shaft seal, or the plug in the back of the head? If you are talking about the plug in the back, buy the plate from IPD, it bolts on there and helps to hold that plug in.
If the front shaft seal, check for crankcase vacuum. While the engine is running, carefully unscrew the oil filler cap. It should stay sucked on if everything is working ok. If not, then you have some kind of PCV problem.

Greg
--
http://home.earthlink.net/~greg.wong/






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.