The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Over drive controll 700 1992

posted by  ckbrew on  Sun Mar 23 03:20 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Dec 7 22:20 CST 2012
[RELATED]

The over drive controll system on my 745t Is not functioning. The car is in OD all the time, but pushing the cut out switch will not disengage the OD. I replaced the OD solenoid. That did not solve the problem. In the process of replacing the solenoid, I was first given an incorrect solenoid. When that solenoid was installed, then OD was cut out, and would not engage. The OD indicator light was on. When I run the car without any solenoid, the OD is disengaged, and the OD indicator light is off. So the mechanism controlling the trans works, & the solenoid is new. Must be the switch in the shifter, correct? How should I check for this? How shoud I go about opening up the shifter & replacing the switch? Or is there something else I should do?
Thanks.
Mark- 1992 745T 207K






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.