The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Rust prevention/repai 200 1983

posted by  jbowser on  Tue Jun 10 15:53 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Dec 24 08:36 CST 2010
[RELATED]

Surface rust can be fixed just by sanding to bare metal, treating the metal with something similar to DuPont Metal Prep, priming and painting. If there is a hole NEVER plug it with plastic filer (aka Bondo) as the plastic filler is porous and will act like a sponge.

If there is a hole the rusted metal must be cut out, the backside treated with something like POR-15 and patched with either new sheetmetal or fiberglass. Once this repair is made then plastic filler can be used to smooth and contour the repair before painting. I suppose pinholes could be "fixed" with just POR-15 but pay close to the instructions for topcoating with paint as it is a bit tricky.

Regards,

Justin B.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.