The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

AC dripping in car

Lets go to basics. The water dripping is coming out of the air which comes into contact with the chilled surface, just like on the surface of a cold soda can or beer bottle.

The cure must therefore be to make the surface which the air contacts not be so cold. The black foamy sticky stuff is pretty good. Call around, like to an a/c shop, and see if you can get a bit of that. Use the vinyl disposable gloves when working it.

Otherwise improvise. My usual hardware store has black foam pipe insulation (in stock in winter) for house pipe wrapping. It come sized for the O.D. of the pipe to wrap, and in 8-foot sections. Cheap stuff. Cuts easy with scissors or utility knife. Seals good. Just get the chilled pipes covered with some insulation of some kind. Finish seal with duct tape.

Good Luck,

Bob

:>)








USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.