The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Strut noises 700 1992

I had an annoying "rattle" after changing front struts on a 91 740 that was most evident a low speed when going over small bumps. Turned out to be that the "gland nut" (large nut that holds the shock in the strut tube) was not tight allowing the shock to move around inside the strut tube. Jack the front and remove the wheel. Take a long cold chisel with the point ground flat, a long drift or a large screwdriver, engage one of the "tabs" on the gland nut and use a large peeny hammer to tap it clockwise to tighten it. I though I had mine tight when I changed the strut but I was able to get a full 1 and 1/2 turns on it the second time. Stopped the rattle. I believe there is also a curved spacer in the bottom of the tube that may have come out or flipped over when the old shock was pulled out.

bl






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.