The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Cargo/Dog Gate Question 700

I don't have a picture but I recently got a gate from eBay. The mounting points are on the upper window sill, there are removeable rectangles just above the rear seat on both sides. Upon removing these plastic pieces you will find a threaded hole into which a mounting plate that should be included with the gate. I mounted mine with the holes rearward and the outer ends of the guard curving forward. This way when you swing it up rearward it follows the curve of the headliner. The lower hook can go on the seat back and release by swinging the seat a little bit forward. The upper hook can go on the underside of the window upper sill. These can all be made snug enough that there is no rattle. You could also cut holes in the plastic rectangles and replace them for a neater look. Hope this helps






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.