The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Humidity 200 1983

When you have to start it "damp", first spray WD-40, CRC, etc, on the cap & wires and top of the coil (I think the cap/coil area are the most critical). The dust/dirt accumulation in these areas can absorb enough moisture to conduct or "bleed off" the high-voltages intended for the spark plugs. The spray will temporarily overcome this effect and allow you to start.

When you have time, pull the cap and wires so you can clean the cap inside and out. Then spray the outside with something like a silicone spray. Same for the top of the coil. A dab of dielectric silicone grease applied to the inside of all the ignition wire rubber "boots" is also recommended.


--
Bruce Young,
'93 940-NA (current)
'80 GLE V8 (Now gone)
'83 Turbo 245
'73 142 (98K)
'71 144 (track modified--and still here)
New 144 from '67 to '78
Used '62 122 from '63 to '67






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.