The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Starter "Service Socket" — One terminal, NOT two!

Starter Test Point—is *definitely* NOT the two-terminal plug near the Coil! That's the one for testing CO test point for the LH 2.0 (pink wire) and for shutting the IAC to set/adjust Base Idle speed (blue/white wire). I don't think either of these should get 12 volts applied to them.

The Bentley diagram for '84 shows the Starter test point (aka "Service Socket") to be have a Blue wire. It should be in the firewall area above the starter, with a black terminal housing (female spade inside).

Putting 12V to it energizes the solenoid & spins the starter. Just like the crude way of doing it with screwdriver.

--
Bruce Young,
'93 940-NA (current)
'80 GLE V8 (Sold 5/03)
'83 Turbo 245
'76 244 (lasted only 255,000 miles)
73 142 (98K)
'71 144 (track modified--crusher bound)
New 144 from '67 to '78
Used '62 122 from '63 to '67






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.