The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Front Engine Seals 200

Well, I made the tool for the crank shaft seal out of PVC pipe from ACE hardware. It cost me about $1.24 and worked very well to push it in. You can use PVC for all the seals to push them in, just run to the hardware store once you get your seals, match up the dia with the dia and then make it look like the Volvo special tools in the Bentley. If you need a pic of that, let me know, i'll take one and email it to ya.

Get a seal pick to pick them out with. It looks like a dentist tool and you can get it at autozone or napa or auto part store. about $6. picking them out takes the most time cause if they are really old, they break into a thousand pieces.

DO NOT forget to oil up the seals well before installation, else they will fail on you by drying up (it gets hot next to the engine block). but don't over oil them or they may slide out and then you have problems. Moderation is key.

Good luck
Chuck
--
'88 244 170K, '87 BMW 325e 172K (used to feed a '84 245 'till 227K)






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.