The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Distributor problem 120-130

Aidan,

Congrats on getting it running.

The timing won't have much affect on the smoothness of the idle unless it's way off. I recommend that you set it between 15 and 20 BTDC, no further advanced. It's best checked with a timing light, if you have one (and if you don't, an inexpensive model is well worth the cost).

When you installed the SUs, are you sure you didn't introduce an air leak someplace? Manifold gasket, carbs to manifold gaskets, some tubing not hooked up?

Is there fuel in both float bowls? Are two spark plugs white and two dark?

Are the air cleaners on right side up?

Are the throttle shafts snug in the carb bodies, or can you rattle them around?

Do both carbs draw the same amount of air at idle? Viewing with the air cleaners off, do both carb pistons start to rise at the same instant when you open the throttle?






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.