The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

front capipers...how to remove lines 700 1990

Chuck's right, you have to take off the OTHER end of the rubber hoses first. The metal line unscrews from the metal crimped end of the rubber line. You'll need to loosen them both, then remove the lines from the caliper once they're free. If there are little extension tubes at the caliper end of the rubber line, then you should reuse them, BUT I have found that you don't have to- you can just use the little copper washer under the end of the new hose. They seem to be the same thread.
To get apart the metal line from the rubber line, you will need an 11mm flare nut wrench. Just about nothing else will work.
And PB Blaster is your friend.
--
Rob Bareiss, New London CT ::: '87 244DL/M47- 229K, 88 744GLE- 218K, 82 245T-181K Also responsible for the care and feeding of: 88 745GLE, 231K, 87 244DL, 239K, 88 245DL, 246K






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.