The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Problem installing small tachometer 200 1989

The three connections on the tach are for a molded plug and wiring harness to fit onto. This powers the small clock that usually goes along with the tach. You've got +12 battery power to the clock, a black ground wire, and a wire for the instrument light in the clock. The clock is intended to be a remote unit fed by the tach. The plug for it's harness looks a lot like a headlight connector for a car with sealed-beam headlights.
THe white/red wire goes to a double male spade lug soldered to the back of the instrument cluster circuit board. The other terminal is left exposed.

Good luck, hopefully this didn't hurt anything.
--
Rob Bareiss, New London CT ::: '87 244DL/M47- 229K, 88 744GLE- 218K, 82 245T-181K Also responsible for the care and feeding of: 88 745GLE, 231K, 87 244DL, 239K, 88 245DL, 246K






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.