The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Testing Cold-Start Injector on B21F 200 1981

Sounds like you are on the right track if you just want to make sure that the injector is not leaking any extra fuel into the engine. If you have an impulse relay fitted it should be found in front of the passenger or driver side strut tower (it is behind the windshield washer bottle on the 80+ V6's). In my dealings with the K-Jet Systems I have found that a rich (leaking injector) mixture causes a high idle and that a lean (air leak) mixture cause the rough idle you mention. I would look high, low, and in between for a loose hose, cracked gasket, leaky injector seal, or leaking K-Jet Boot. Good Luck!

Sincerely,
--
Julio Meza

1979 264GL B27F 125K --> BW55->M46, CLS, IPD Sway, 81+ Dash, Gauges, Flat Hood & E-Codes

1979 262C B27F 160K --> Restore Project w/Possible B280F

1984 245DL 214K -->Wifemobile






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.