The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

IGN SW failer? and another issue 700 1986

Wow that's a new one.
Usually the switches get sticky, and fail to return from START (III) position to RUN (II). When this happens, the car will run, and no accessories will work, including lights.

As noted, a restart fixes it. BUT!!! the car doesn't quit running.

Replacing the electrical part of the ignition switch is a good place as any to start. Not too hard to do, just 2 M4 screws on the back side of it holding it to the lock. Should require a straight screwdriver bit. I use an offset driver or a screwdriver bit with a 1/4 inch wrench around it. A mirror may help to see what's back there.

Good luck.
--
Rob Bareiss, New London CT ::: '87 244DL/M47- 234K, '82 245T/M46-182K, '84 242DL/AW70-100K, '89 244DL/AW70- 212K and I miss my: 86 244DL 215K, 87 244DL 239K, 88 744GLE 233K, 88 244GL 147K, 91 244 183K






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.