The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Source of timing advance 700 1987

That is all handled by the EZ117k control unit. It has a throttle switch, engine speed sensor, and a knock sensor. Apparently that is all it needs to base it's ignition advance and retard off of. You would think they would have figured the engine load signal from the MAF in there but I guess it really is not necessary on a system as simple as that. You know what is really strange to look at is the later cars with the LH2.4 system that have the crank position sensor in the top of the bell housing. You can put a timing light on them and crank the distributor as far as it will go in either direction and the timing does not change. There is nothing inside the distributor except a rotor but you still think it would change the timing, but it does not. If I had to guess I would say that the timing is changing but that the ignition control unit is faster than the eye and compensates for it so it keeps firing right where it should.

Mark






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.