The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Removing Ignition Switch 444-544

posted by  Ron Kwas on  Sun Apr 17 04:21 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 04:03 CST 2014
[RELATED]

Sil;

If it's the same as 122 (likely!)...two phillips screws hold the IGn switch to the dash, and (three?) hexhead bolts hold the coil to the firewall...so it will be usefull to be prepared with nut drivers/sockets in the 3/8" to 7/16" range (possiblly metric also...it is a Bosch part as you know). The nuts securing the wires, use 7mm or 9/32" nuts. The lock cylinder needs to be removed first, so you will need the key or you'll have to pick the lock into the IGN ON pos so that you can puch the release pin.

Cheers





USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.