The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Codes 232 and 221 700 1990

Those are fuel adaptive codes that means the control unit has adjusted itself too far one way or the other in an attempt to correct an overly lean or rich condition. These codes can be set by a number of things depending upon the status message which tells you whether it is marched lean or rich. Obviously if it is lean you should be looking for things that would either cause it to run lean (vacuum leaks) or things that will make it think it is lean(faulty O2) and the opposite is true of the rich condition, you look for faulty pressure regulators, clogged air filters, O2 leaks around the O2 sensor and the like. It could very easily be a faulty O2 sensor and a cat that is either plain worn out or was taken out by the faulty O2 sensor.


Mark






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.