The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Inst. cluster flex board S90-V90

i replaced the entire cluster a while back because of what is one of the 2 most important idiot lights not working.low coolant.now i'm having an intermittent problem with the replacement,so,i've pulled the original back off the shelf to investagate.pulling the flex bd off is time consuming and fragile.i found the break in the trace between warning lights 8 and 9.it is not visible without a magnifying glass and took using the meter to isolate it.
my question is,the correct method of repair.i have a rear defrost repair kit that is hiding somewhere in garage right now,so i'm taking a break from my search.method #2,just hitting it with a soldering iron.my concern there is burning thru the flex bd.
anyone done a repair to the bd and what method did you use?
--
92-965-221k, 94-965-220k, 92-944t-211k






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.