The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

OD Relay Jumper

If I want my OD to be on all the time (I do not tow nor do I drive in hilly areas, thus do not need the OD on/off switch function)can I just leave the jumper on the relay.

Answer assumes you have a 240 series. It wastes time and posts when you omit your car details. Jumper is doable on 700/900 but not as easy.

You'll have to remove the relay and replace it with a jumper wire in the relay harness plug (or relay rack).

Make up a jumper with a 1/4" flat push-on terminal on each end.

Connect the plug socket with the Blue & Gray wires (formerly to relay #15), to the socket with the White wire (formerly relay #87, to solenoid).

The Arrow light should stay off because there will no longer be a ground on the Yellow-Red wire that went to relay #87a and thru the relay to ground.



--
Bruce Young
'93 940-NA (current) — 240s (one V8) — 140s — 122s — since '63.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.