The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Stalling during warm up 700 1990


Eric,

The flame trap on your 740 is underneath of the intake manifold, towards the rear of the engine. Remember where the IAC is located? Go directly towards the back of the car from it and you will find a black plastic box bolted to the engine. It has a rubber tube with a plastic "Y" shaped connector coming out of it. Get a new one of these, along with the flame trap that's inside of it. You may also need to replace the rubber hose that connects the flame trap to the crankcase vent box. I'm not sure that this will help with your stalling problem, but it's a good idea to replace the FT as routine maintainance.

I can't remember if you already told me this, but are you sure that the AMM is okay?

Good luck with it.

Dave






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.