The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

pistons and engine block 700 1988

Hello...I have taken the following measurements: piston # 1 stamped with a (C)..measures 95.88 mm lowest, 95.89 mm highest. Piston #2 stamped with a (D)lowest was 95.91 mm & 95.92 mm highest. Piston # 3 stamped with a (D).. lowest 95.91 mm and highest was 95.92 mm. Piston #4 stamped with a (D).. lowest was 95.88 mm and 95.89 mm highest. The b230ft cylinder measurements were: Cylinder # 1 lowest was 95.97 mm, highest 95.99. Cylinder #2 lowest was 95.94 mm and highest 96.01 mm. Cylinder # 3 lowest was 95.99 mm and highest 96.01. Cylinder # 4 lowest was 95.99 mm and 96.04 mm for the highest.I am trying to use the old pistons with new rings. Can I re-use my exsisting pistons or do I have to rebore to the next ovesize? The new ring set is made by hastlings and they measure as follows: Upper and lower compression rings thickness is 1.62 mm, and are 3.98mm wide. The oil scraper rings came in at .42mm thick and 3.16 mm wide. Please advise. Thanks again.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.