Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2012 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

How to replace wagon taillights 200 1989

uid 25912's pic
posted by  Sven's Maintainer on  Wed Oct 26 03:54 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Sep 16 20:44 CST 2012
[RELATED]

Yes, the two nuts unscrew from the inside. I used a needle-nose pliers as I didn't have a deep socket. Worked OK. Then the housing pulls off from outside. If you don't have a new gasket you will need to be careful not to tear the old one.

I replaced the whole assembly - not just the clear colored plastic.

Be careful not to switch bulb holders from left to right. They're different (some are black + some white) and apparently it doesn't work right if you change them.
--
Sven: '89 245, IPD sways, electric rad. fan conversion, 28+ mpg - auto tranny. 850 mi/week commute.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New How to replace wagon taillights [200][1989]
posted by  someone claiming to be ugly duckling  on Tue Oct 25 10:46 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.