Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2008 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Noise suppression relay; fixed problem 700 1989

Well, as it were, the RSR was the culprit. I pried the cover off and it looked new on the inside. I plugged it in to the harness with the cover off and watched the relay click on, but it would falter if I tapped it or shook it. After a few minutes I discovered the problem- the connector (4 barrel plugs) was allowing all 4 plugs to get pushed away from the relay giving it a very loose contact. After I pushed in every plug connector individualy, it has run perfect!!
Thanx to all for your responses.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Noise suppression relay [700][1989]
posted by  someone claiming to be Dr Jekyll  on Mon Nov 14 15:57 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.