Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

What I'm using.... and some comments.... 200

Ken (others),

Where is the best place to tap into the old 9004 headlight system when converting to an H4 setup with relays, heavy wire, etc? I know you power the relays off the battery (or applicable power point) and send power to the H4 sockets from the relays. But what's the best way to tell the relays when to turn on/off? Do you just cut one of the old 9004 plugs and use those wires, or should the relay input come from farther back in the stock headlight system?

Thanks--

(And I have, as of yesterday, a full used Cibie E-code setup in great shape, sourced in pieces from eBay France and Germany)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Need E-Code bulb suggestions [200]
posted by  Sven's Maintainer  on Wed Jan 11 15:06 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.