Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2000 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

stalling 200

posted by  Aye Roll on  Sun Jul 23 02:57 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Oct 14 21:08 CST 2014
[RELATED]

One very likely possibility not mentioned is a very dirty throttle body. If it's gunked up, it may prevent the throttle from closing 100%, and not contacting the throttle position switch.

Without TPS closure, the injection system does not go into "idle" mode and the idle will hunt up and down, coming close to stalling even when warmed up.

The gasket for the throttle is like 79 cents- buy one and a can of carb cleaner, take it off and clean it up.
--
Rob Bareiss, New London CT ::: 87 244DL, 88 245DL, 90 745GL, 84 242DL project, 89 244 parts, 88 244DL to replace the 87






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New stalling [200]
posted by  0067  on Fri Jul 21 15:37 CST 2006 >
  • New stalling [200]
    posted by  lucid subscriber  on Sat Jul 22 00:16 CST 2006 >
  • New stalling [200]
    posted by  rstarkie subscriber  on Sat Jul 22 01:51 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.