Volvo RWD S90-V90 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2007 S90-V90 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Replacing the Transmission mount S90-V90 1998

uid 11021's pic
posted by  dewfpo on  Thu Aug 3 05:50 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 18:34 CST 2014
[RELATED]

I just did this last week on our 98 S90. It's a piece of cake. I ordered a Volvo OE mount from FCP Groton. It was $56.50 plus about $6 Shipping. Arrived in 4 business days. You can get off brands much cheaper if you like.

As others have said. Jack the front of the car up. Use jack stands in addition to the jack(s) for safety.

Place a 2x6 or 2x8 board, flat under the trans pan and place a jack under it to hold the weight of the drivetrain.

Remove 3 - 10mm bolts holding the O2 wiring harness.
Remove 1 - 14(?)mm bolt in the center of the mount
Remove 4 - 15(?)mm bolts holding the crossmember in
Remove 2 - 12(?)mm bolts holding the mount to the crossmember.

Reverse to install.

I could not find a torque spec for the bolts but they were on fairly tight so I torqued the 14 & 15mm bolts to 39 ft./lbs.

DEWFPO
--
1998 S90 077,400 and 1995 964 154,100






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Replacing the Transmission mount [S90-V90][1998]
posted by  green volvo mechanic  on Wed Aug 2 16:07 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.