Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2002

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Little help with tach install and glove box lock install

posted by  B.C. on  Sun Aug 20 19:43 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Mar 28 22:28 CST 2012
[RELATED]

Cannot help on the small tach, all my drivers are both large tach cars.

Glove box - following in from my work on my 1988 244, your newer model may differ.

The lock is held into the door with a single spring washer. Turning the washer 90 degrees will release the lock unit. I usualy use a pair of Channel-Lock pliers to grip the two sides of the washer that are not held tight against the door. Turn the washer 90 degrees, the lock will be freed. It can then be manipulated out of the door.

Good Luck,

Bob

:>)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Little help with tach install and glove box lock install
posted by  Pancho Urbano  on Sun Aug 20 08:41 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.