Volvo RWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2007

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Installing struts, removing old bottom spacer?

posted by  zagato64 on  Thu Aug 31 10:00 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Hi,

First post for me here, been lurking for a while.

I own a '93 940Turbo wagon.

I'm installing some tokico struts and ran into trouble. If I try to use the top spacer supplied the strut protrudes out the top of the strut housing so far that I cannot get the gland nut on. If I use only the bottom spacer the gland nut bottoms out and the strut is loose in the housing.

I called tech support and they told me to remove the original spacer in the bottom of my strut tube. The problem I have is I don't see a removable spacer, what I see in the bottom of the strut tube does not appear to be removable at all. I'll attach a picture. Is their something removable that I'm missing here?

Here's a link to a pic of my strut tube from the bottom:
http://pg.photos.yahoo.com/ph/tflint/detail?.dir=199dscd&.dnm=dc07scd.jpg&.src=ph

Thanks in advance for your help,
Tim





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Installing struts, removing old bottom spacer?
posted by  zagato64  on Thu Aug 31 10:00 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.