Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2005 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

where should the flame trap be? 700

posted by  Brianm on  Wed Sep 6 03:02 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Jan 17 11:26 CST 2009
[RELATED]

Car is 740 GLE wagon, 1990 with 16-valve B243F engine, 228,000 miles.

Can't find flame trap. Bought it used and could never find it.

A hose goes directly from the oil trap/breather box to a formed nipple on the air intake hose (the one with bellows that runs into the throttle body for the air mass meter). The oil/breather box has a perforated opening that seems to be part of the box (I have to ise a small wire the clean the hose) - does this functionas the trap, or should I have an assembly with a flame trap on the top of the box?

Also, if I should have an assembly on the top of the box, should a a second hose, a samller vacuum line lead off from it, or do I use a formed tube that sits on top of the box but which has not connection for a smaller vacuum top.

Help would be appreciated, since none of the books or FAQs really seem to show my set up. As always, many thanks in advance to the very generous members here.

Brian






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New where should the flame trap be? [700]
posted by  Brianm  on Wed Sep 6 03:02 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.