Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2000 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

NMI oops 200 1985

posted by  Strong-Pimp-Hand on  Wed Oct 4 01:41 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Mar 8 12:15 CST 2009
[RELATED]

most people are not going to install the cam, take measurements, uninstall the cam, add silencers, and then reinstall the cam again.

in fact, i have tried it the way you suggest and found that: before new silencers my measurements were in the 14 to 15 thou. range.

after new silencers, 13 to 14 thou. range.

when i did the vx (the enem too) and new silencers, it definitely needed to be shimmed.

i understand your base circle point of view, but what about the additional lift?
--
Enem v15 cam, adj. cam gear, new head, trans cooler, stainless brake lines, e-fan, braces, IPD sways, 100% poly bushed, Bils, boxed front & rear arms, wagon lowering springs, FWD rims, 25/32mm adapters, powder coated stuff, zero mile-d, & more






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New vx cam and cam gear [200]
posted by  91lligrama  on Tue Oct 3 07:38 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.