Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2004 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Conversion Ring, Master Cylinder, Final Setup 120-130

posted by  RepairmanJackal on  Wed Oct 4 15:38 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Jun 10 09:52 CST 2014
[RELATED]

For those of you who suggested that I go with a later-style master cylinder issue, may be pleased to know that I picked up a conversion ring and have installed the more conventional master cylinder from my '71 P1800.

Everything bolted up okay (a little snug on the bolt-holes), but I'm unsure about the actual pedal connection. The bolt that came with the ring kit is far too short to fully engage the brakes. Even with the adjustment fully extended I can push the pedal to the floor and still not get full resistance. Mind you I have not bled the brakes yet, but It shouldn't be going flat to the firewall and beyond.

SO... Just how long a bolt/push-rod do I need to get this setup correctly and how have other done this part of the upgrade?
--
1967 P220 (Someday my daily driver...), 1971 P1800 (Parts Car), 1972 145S (1993-1997), 1977 245 DL (1993-1999), 1983 245 (1997-2001), 1986 745 GLE (1997-2000), 1990 740 GL (2003-4), 1995 945 (2004-Present)....






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Conversion Ring, Master Cylinder, Final Setup [120-130]
posted by  RepairmanJackal subscriber  on Wed Oct 4 15:38 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.