Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2004 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

high beam foot switch replacement 120-130

posted by  pdx 445 on  Sat Oct 21 08:58 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Dec 10 14:39 CST 2013
[RELATED]

Danny -

I recently revived a sticking footswitch by "cleaning" and lubricating it with lots of WD-40 sprayed into the terminal area and working the switch many times. The WD ran back out of the button and terminal areas, full of rust and gunk, but the switch now rotates between high & low contacts every time I stomp it.

In my opinion, WD-40 is a decent cleaner/deoxidizer for high current contacts like the high/low beam switch. You do wash out any heavier lube that's left, but it was probably full of crud anyway. You've got to put up with the smell of WD for a while, though.

I opened up another switch years ago and found the contacts were so worn the switch would hang up on the worn areas. Time for a new switch, if so.

Mike






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New high beam foot switch replacement [120-130]
posted by  Danny  on Tue Oct 17 04:31 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.